There are numerous “do it yourself” air conditioning setup programs provided through the internet, some of which are very useful and others that offer simply the very basic actions for setup. It is necessary to remember that incorrectly doing your air conditioning setup can wind up costing you more cash in the long run, so be sure to clarify any questions and entirely comprehend the process before you begin.
The initial step in completing your air conditioning setup process is to completely read through the manufacturers manual. You will need to be trained and licensed in dealing with the refrigerant or coolant, or you will need to contract with someone to do this action. In addition, if you are not an electrician, it is always best to have an expert complete this action so you do not wind up wasting time and cash later on when the structure is inspected. If you need to get any permits, be sure to do so prior to starting the air conditioning setup.
See to it that you have all the essential supplies before starting the task Air Conditioning Services Dallas TX . This consists of tools, the air conditioning unit itself, ducts and hangers and other equipment or supplies required as per the manufacturers directions and your own particular structure. The next action is to find the outdoor part of the unit on level ground, ideally in a shady spot, close to the home and at least 3 feet from an electric or gas meter as per building codes in your area. Have a concrete pad to place the unit on and fasten as needed. A little opening is then drilled through the wall to enable electrical wires and pipes to stretch from the internal to external unit.
Place the internal unit in the plenum above the furnace as per the manufacturers directions. Attach the suction line that will carry the moisture between the inside unit and the condenser on the exterior. At this point the high voltage connects need to be made by an expert electrician. There are additionally low voltage wires that will need to be connected, these can be done by the electrician or by the homeowner as per the air conditioning setup directions provided.